|
This one is VERY noisy (gear growl). The rear
wheels were badly out of round. No pickup on the rear truck as the wire
was crushed when the seats were installed.
Quality control is not one of Bachmann's strong points. |
![]() |
![]() |
This Bachmann 'Spectrum' Doodlebug
I custom painted for our local shortline. To track properly on my layout
it was necessary to shorten the unit. I removed 'two roof panels' / 5 passenger
windows (about 2").
The unit runs well. I would suggest enlarging the holes over the rear pickup as the wires broke on mine in just 9 hours of operation. I added some foam from a sponge under the seats to help quiet the 'whine' from the unit |
![]() |
This is a Roundhouse MDC kit I built and painted. There was minimal
flash on the castings and easy to follow instructions. I added a
custom built all-weather cab, feedwater heater, triangle number board
and a load of coal in the tender.
The kit has a can motor and runs very well. |